Terms & Conditions

Direct Trade Windows Ltd
Terms and Conditions of Sale, Supply and Installation

(Effective Date: January 2026 onwards)

In these Terms and Conditions, “DTW” means Direct Trade Windows Ltd.

Contents

1. Quote Conditions

a. The indicated quoted prices are subject to change in accordance with applicable Law, VAT, and other effective changes, and are valid for fifteen (15) working days from the date of this letter.

b. Our price is based on deliveries and works being carried out during normal working hours, defined as 7:00 AM to 4:00 PM, Monday to Friday, excluding Bank Holidays, in one continuous visit within the confines of a mutually agreeable programme. It also assumes that materials can be delivered in large full loads. Multiple visits and multi-phased working will be chargeable unless specifically agreed otherwise and stated in our quotation.

c. E-mails are prone to be scammed. We will not email you with a change of bank details as emails are not secure. Please do not rely on e-mail notification of bank account details or changes without direct verbal confirmation from any of our trusted sources.

d. We do not accept responsibility if you transfer money into an incorrect bank account.

e. All lead times provided are guide lead times based on recent production dates received. DTW cannot confirm exact delivery dates until we have received drawing approval and placed our orders with our factory/suppliers.

f. Our price is based on dimensions being confirmed to us unless a site survey is shown as included within our offer.

g. DTW uses its best endeavours to price all items correctly and to the correct dimensions, based on the information received. It is the responsibility of the client to check our detailed quotation to ensure that we are compliant and that our schedule is in accordance with the project requirements.

h. All supply and installation prices are subject to site conditions and/or survey (if a survey is provided).

i. No fire escape hinges are included within the quote unless specified (or to comply with building regulations for supply and install jobs).

j. No trickle vents are included within the quote unless otherwise specified.

k. No restrictors/restrictor hinges are included within the quote unless otherwise specified.

l. All doors are quoted as OPEN OUT, unless specified otherwise in the quote.

m. Our aluminium products are not designed for bearing weight. The client is responsible for performing loading calculations, either personally or by engaging the services of a structural engineer.

n. Item costs may increase if items are omitted from our quotation, as the associated costs such as labour are generally spread equally across all items.

2. Design

a. All drawings are viewed from outside.

b. All sizes are finished frame sizes, inclusive of any frame extensions such as sub-cills and add-ons. We do not make allowances for tolerance, sunken frames, or any other fitting details.

c. You will be required to check and approve all specifications and dimensions as detailed in the CAD drawings that will be provided to you before manufacturing commences. In these circumstances, you are fully responsible for the measurements and specifications detailed.

d. Non-Load-Bearing Disclaimer: Our windows and doors are explicitly designated as non-load-bearing components. No calculations or provisions for weight-bearing capacity are made for these windows and doors. It is the sole responsibility of the client to ensure that the selected product is suitable for its intended use, and we disclaim any liability for any issues arising from the misuse or inappropriate application of our non-load-bearing windows and doors.

e. Interface Detailing: DTW provides fenestration products and their installation into prepared openings. Unless expressly included within our quotation, DTW does not provide design input on the interface between our products and the surrounding building fabric, including but not limited to cladding details, DPC arrangements, drainage channel design, or structural opening waterproofing. Any design input offered by DTW in this regard is provided as a goodwill gesture only and does not constitute the assumption of design responsibility for works by others.

3. Order Terms, Payment Terms, and Cancellation Policy

a. Payment terms are subject to variation based on the final contract value.

i. For supply and install jobs valued over £5,000 (exclusive of VAT), the client shall deposit 50% upon order placement, 45% five working days prior to installation, and 5% on the day of completion.

ii. For supply and install jobs valued at £5,000 or below (exclusive of VAT), or for supply-only jobs valued at £5,000 or below (exclusive of VAT), 100% payment is required upon order placement.

iii. We will not commence with our design drawings until the deposit payment has been received by us (cleared funds).

iv. DTW reserves the right to amend payment terms at its sole discretion on a project-by-project basis. Any amended payment terms will be confirmed in writing to the client prior to order placement.

b. All products installed at the client’s facility shall remain the property of DTW until they are fully paid. DTW reserves the right to remove any and all products that are not paid in full and charge a fee of 20% of the total order value payable upon the removal of the products, representing DTW’s reasonable estimate of administration, logistics, and remediation costs.

c. Due to the specialist nature of our products, we do not accept liability or responsibility for delays.

d. Following recent construction business failures, we do not accept retention to be deducted during the construction process.

e. Cancellation Conditions: If the order is cancelled within seven (7) days, a minimum of 10% of the contract sum will be retained to cover costs incurred. If the order is cancelled after fourteen (14) days, or after survey (whichever comes sooner), we reserve the right to charge up to 60% of the contract value, reflecting the actual costs incurred at that stage including but not limited to design time, survey costs, profile orders, and manufacturing commitments. Nothing in this clause affects the consumer’s statutory cancellation rights under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013.

f. If products have been manufactured or are in the process of manufacturing, any and all advance payment will be non-refundable to the extent that it reflects costs genuinely incurred by DTW, including but not limited to profile purchase, glass orders, hardware procurement, and manufacturing labour. If profile has been ordered specifically and specially for the client’s job, the order shall be non-cancellable and non-refundable. DTW reserves the right to charge the full contract value where manufacture has been completed or substantially completed.

g. Our quoted price is fixed for six (6) months from the date of the deposit payment. We reserve the right to revisit and amend the quotation if the project is delayed and we have not proceeded with manufacture/production.

h. If a contract exceeds six (6) months from the first install date for supply and install jobs, or from the deposit payment for supply-only jobs, the whole balance becomes due (unless a payment plan is agreed to beforehand).

i. We store and process all Personally Identifiable Information in conjunction with current data protection legislation. Once an order is placed with us for works, we are contractually obliged to hold and process data pertaining to the project and store this data for the full period of the warranty. It is within your rights to request data erasure, excluding data we are required to hold for contractual or legal obligations. We hold this data in accordance with our data retention policies. If you have any questions regarding our data policies or would like to request an amendment to the data held, please contact the office.

j. Buyer’s Bankruptcy: If the Buyer shall default or commit any breach of any of his obligations to the Seller, or if any distress or execution shall be levied upon the Buyer, or if the Buyer shall offer to make any arrangement with creditors or commit any act of bankruptcy, or if any petition in bankruptcy shall be presented against him, or if the Buyer is a limited company and any resolution or petition to wind up such company’s business (other than for the purpose of any amalgamation or reconstruction which becomes effective) shall be passed or presented, the Seller shall have the right forthwith to determine by any written notice posted to the Buyer any contract then subsisting without prejudice to any claim or right the Seller might otherwise make or exercise.

4. Site Survey

a. If a site survey is required, a mutually convenient date will be organised by the appointed surveyor.

b. The buyer or an appointed representative that is approved to make decisions on the buyer’s behalf must be present on-site during the survey.

c. The survey sheet will need to be signed by the buyer or the appointed representative.

d. The client is responsible for ensuring that clear openings are prepared for the surveyor to take measurements. Additionally, it is essential to clearly indicate the finished floor levels during the survey. If this information is not provided during the survey, we kindly request the client to provide these sizes via email. If finished floor levels are not confirmed at the point of survey, DTW will manufacture to the base level as measured. Any subsequent request to raise the installation height will be subject to the limitations set out in clause 13A(c) and (d).

e. Upon completion of the survey, we will send the surveyed size confirmations to the client. It is the client’s responsibility to thoroughly review and verify the sizes for accuracy.

f. Site Survey cancellations will need to be notified in writing forty-eight (48) hours prior to the scheduled survey date. Cancellation after this time, or on the day, may incur a re-survey fee of £350.00 + VAT plus mileage cost, chargeable at the sole discretion of DTW.

g. Variation from the contract will be picked up by the surveyor, or when manufacturing drawings are being processed.

h. DTW will notify any variations and cost implications to the client in writing only.

i. Variations will only be accepted in writing following the cost and lead times being supplied to the client. No design work/order will take place without receiving the full acceptance of the variation costs in writing from the Buyer.

j. No verbal variations or instructions will be accepted.

k. Variation costs will be applied on the part payment invoice.

l. Construction Drawings and Opening Details: Where DTW is installing into new or modified structural openings, the client is responsible for providing construction drawings, section details, or other relevant documentation that shows how the openings have been prepared and how the glazing is intended to interface with the surrounding building fabric. DTW may request such documentation before, during, or after installation. Failure to provide this information when reasonably requested may limit DTW’s ability to investigate or diagnose any post-installation issues and may affect the scope of any warranty claim.

5. Speedy Service

a. If speedy service is selected, there is no cooling-off period for cancellation. If we do not meet the lead times for a speedy service, the refund of the charge will be reflected on the part payment invoice.

b. The timeframe for speedy service begins from the date of approval of manufacturing drawings.

6. Manufacturing

a. Manufacturing of products will commence from the point of order/survey and will take approximately eight (8) to ten (10) weeks delivery lead-time, depending on products ordered and to be confirmed after survey and sign-off (unless agreed differently in writing).

b. Please note if drawings are requested after survey, it may add a further two (2) weeks to the lead time.

c. All sub-cills are cut to the exact frame width unless otherwise stated.

d. If products have been manufactured or are in the process of manufacturing, any and all advance payment will be non-refundable. If profile has been ordered specifically and specially for the client’s job, the order shall be non-cancellable and non-refundable. DTW reserves the right to charge the full contract value.

e. Due to the specialist nature of our business, we will from time to time modify or alter profiles of standard systems so that they work towards a project solution, in a specific way or in a way that we feel is better suited to the project. We may also manufacture systems to sizes beyond the manufacturer’s recommendations and/or fabricate or supply systems which have not been tested to the size or configuration/method advised. If we receive a report from a system supplier/private independent body that we have not installed in accordance with the advised method or recommendation, we will not accept claims or liability where a report has been provided by the manufacturer or an independent body/company. DTW does not comply with CWCT or alike.

7. Lead Times

a. Our current lead-time is eight (8) to ten (10) weeks on most of our products (customers are being advised when this is longer). Due to our reliance on the supply chain for materials, lead-times and delivery dates can change at any time for a variety of reasons out of our control and sometimes this can be at very late notice.

b. In the event your order is delayed, we will inform you as soon as possible with apologies; your patience is highly appreciated.

8. Force Majeure

a. Neither party shall be in breach of contract nor liable for delay in performing, or failure to perform, any of its obligations under the contract if such delay or failure results from an event or circumstance beyond either party’s reasonable control, including but not limited to: acts of God, fire, flood, storm, pandemic, epidemic, government restrictions, sanctions, war, civil unrest, terrorist acts, strikes, lockouts, labour disputes, failure or shortage of power or materials, non-delivery or late delivery of goods by DTW’s suppliers, transport disruption, or any other contingency beyond DTW’s reasonable control.

b. If the period of delay or non-performance continues for three (3) months, DTW may terminate the contract by giving fourteen (14) days’ written notice to the client. In such circumstances, DTW shall be entitled to payment for all works completed and materials purchased up to the date of termination.

c. DTW will not be liable for any penalties, losses, damages, or additional costs incurred by the client as a result of delays caused by force majeure events.

9. Rooflights

a. Cladding is not included until stated in the quote.

b. All measurements are quoted as EXTERNAL kerb sizes.

c. Roof lights/floor lights may experience water ponding (water sitting onto the surface) during light rain.

d. Timber, lead work, and gutter works are done by third parties.

e. The quoted price for the lightwell does not include lifting equipment or scaffolding. It includes two installers from DTW, and any other additional person needed to lift the glass is an extra charge of £250.00 plus VAT per person per day.

f. We reserve the right to charge for additional lifting.

g. All units on lightwells are silicone sealed using Dow Corning joint silicone and all silicones used in fitting are Dow Corning 791 & 895, or equivalent structural sealant. If outside sizes are bigger than quoted, the price will increase considerably.

h. Rooflights are limited to a THREE (3) year warranty.

10. Glass Units

a. All glass for casement windows will be assumed as non-toughened.

b. All glass for doors will be assumed as toughened.

c. All structural silicone will be black unless stated otherwise in the quote.

d. All standard glass units (non-internal) will comprise of a double-glazed unit, with an energy efficient outer pane, clear glass inner pane.

e. Oversize units (insulated glass units that exceed 2500mm in both directions) are supplied with a reduced warranty of twelve (12) months.

f. All glass units to be double glazed with black warm edge spacer bar, with argon infill.

g. Iridescence and Toughening Marks: Iridescence (a rainbow-like visual effect) is an inherent and unavoidable side effect of the glass toughening process and is apparent in all toughened glass to some degree. Roller wave distortion and quench marks may also be visible under certain lighting conditions. These are characteristic of the toughening process and do not constitute a defect. DTW will not accept claims, replacements, or refunds based on iridescence or toughening marks in toughened or laminated glass.

h. Condensation: External condensation on the outer face of glazing units is a natural phenomenon that occurs when the external glass surface temperature falls below the dew point of the surrounding air. External condensation is an indicator that the sealed unit is performing efficiently and does not constitute a defect. Internal condensation on the room-side face of the glass is typically caused by high humidity and/or inadequate ventilation within the property and is not attributable to a defect in the glass unit or installation. Only interstitial condensation (moisture between the panes within the sealed cavity) constitutes a sealed unit failure and is covered under DTW’s sealed unit warranty. DTW accepts no liability for external or internal condensation.

11. Glass Units Weighing Over 100 kg or Oversized

a. Lifting Equipment and Scaffolding: Our standard quotation excludes the provision of lifting equipment and scaffolding. It includes the services of two installers from DTW. Should additional personnel be required to manage the glass unit, an additional charge of £250.00 plus VAT per person per day will be levied.

b. Additional Equipment Costs: Should the use of a spider crane, glass sucker, and operator be necessary, additional charges inclusive of VAT will be incurred following a thorough site survey and confirmation of adequate access. A transparent project management fee of 30% will be added to cover all expenses related to crane operation and associated logistics.

c. Warranty for Oversized Glass Units: Glass units exceeding dimensions of 2400mm in both width and height will be covered under warranty for a period of twelve (12) months from the date of installation.

d. Warranty Claims for Oversized or Overweight Units: In the event of a warranty claim involving an oversized or overweight unit, the warranty covers the cost of the replacement unit only. It does not include expenses related to crane hire and labour for installation. Adequate access must be provided to ensure safe transport of the glass to the installation site.

12. Parking

a. Further to parking restrictions and costs being implemented by the government and local authorities, we have had no option (unless the customer provides us with parking permits or parking bay suspension or alternative parking), but to apply these costs to the customer.

b. Parking cost where parking restrictions apply will be charged £100.00 per day.

c. Please note that if it is possible to park legally without incurring any cost, we will.

13. Installation

a. DTW, being a specialist sub-contractor, cannot accept damages to be in line with that of the main contractor/client; therefore, asks for liability to be capped at 10% of our sub-contract sum. Should the sub-contract value be less than £75,000, DTW would consider the project to be a low-value sub-contract and will not accept any cost for damages.

b. The buyer agrees to provide reasonable access to enable installation to be completed as soon as possible after you have been advised that the goods are ready. If within six (6) weeks of such advice an appointment for installation has not been made, the balance of the purchase price will be due and payable, installation will then be made on a mutually convenient date.

c. Unless stated in our quote, all access equipment, be it fixed or mobile, is excluded and deemed to be supplied free issue by others.

d. If required, an extra charge plus VAT for the spider crane, glass sucker, and operator to lift the glass up will be applicable subject to survey and access. Any additional access equipment/other items required will be charged at cost + 30% unless otherwise agreed.

e. FENSA Scope: As a FENSA registered company, we are bound to comply with the latest building regulations Part L1 & L2 for replacement installations within the scope of FENSA. For new build, extension, or structural alteration works that fall outside the scope of FENSA, compliance with building regulations is the responsibility of the main contractor and/or Local Authority Building Control.

f. Installation will be undertaken by our DTW experienced workforce.

g. DTW makes no allowance for any builder’s work (BWIC), such as brick removal, bricking up openings, modifying openings, removal of wooden linings, lintel installations, replacing of internal window boards, removal of internal fixtures (such as radiators, blinds and curtains) and making good; this is deemed to be done by others.

h. DTW takes no responsibility for securing the project overnight when our works are ongoing. This is assumed to be the responsibility of the contractor on site. We can provide a cost/make provision for this upon demand.

i. The maximum allowable ‘live load’ deflection for the steel beam above door systems is 5mm. If the live load deflections exceed this, it can interfere with the door operation. DTW reserves the right to void the warranty if the steel beam deflection is greater than 10mm.

j. We make no allowance for supporting steelwork unless this is shown within our quotation.

k. The buyer shall ensure that the aperture is prepared exactly in accordance with the dimensions detailed on the DTW CAD drawings. If the aperture is not prepared to the correct dimensions, the installation team will wait on site until the builder corrects the aperture for a maximum of two (2) hours. If it is not possible to correct the aperture in the given time, a re-installation fee will have to be added to the invoice and will have to be paid prior to installation.

l. Abortive Visits: Should our installers attend site to carry out installation works and the area of working not be ready, OR should we not receive a stage payment prior to install, we reserve the right to charge a ‘one-off’ cancellation charge of £750.00 + VAT per day of occurrence. This includes any instance where apertures are not prepared, access is restricted, or payment has not been received.

m. DTW is not liable for damage to existing finishes, decorations, plaster, tiles, or floor coverings caused during the installation process. The nature of window and door installation may require removal of or disruption to existing internal and external finishes adjacent to the opening.

n. DTW has allowed to clean our installations and remove protection tape as they are fitted; however, we have made no allowance for a final clean and if required this item would be chargeable unless agreed otherwise in writing.

o. The completed work will be covered by a ten (10) year insurance-backed guarantee and all details, including the FENSA certificate (where applicable), will be issued on receipt of full contract payment to the client.

p. Pre-Installation Inspection: DTW installers will conduct a visual pre-installation inspection of all openings prior to commencing work. Any deficiencies, damage, or non-compliance with DTW’s specified requirements (including but not limited to out-of-square openings, missing lintels, absent or damaged DPC, missing cavity closers, or inadequate sill falls) will be recorded photographically and communicated to the client and/or their main contractor. Where installation proceeds at the client’s instruction despite identified deficiencies, DTW’s warranty shall not extend to defects attributable to those documented deficiencies.

q. Pressure Washing and Non-Standard Testing: DTW’s products and installation seals are designed and warranted to withstand normal weather exposure only. The use of pressure washers, jet washers, or any high-pressure water equipment on or around installed products may damage seals, membranes, adhesive bonds, and weatherproofing materials. Any damage caused by pressure washing or non-standard water testing methods (i.e. testing that does not comply with BS 6375) will not be covered under warranty and DTW accepts no liability for any water ingress or seal failure resulting from such use.

13A. Weathertightness, Base Preparation, and Water Ingress

a. Replacement Installations (Rip-Out and Refit): For replacement installations, DTW will seal the full perimeter of the installed product externally with mastic sealant and internally with expanding foam insulation, in accordance with FENSA requirements and current building regulations. DTW’s weathertightness warranty applies to the seal between the product frame and the existing structural opening.

b. New or Modified Structural Openings Prepared by Others: For installations into new or modified structural openings prepared by others, DTW’s responsibility is limited to the seal between the product frame and the prepared opening (perimeter mastic sealant, expanding foam insulation, and internal finishing where included in the quotation). The weathertightness of the structural opening itself — including but not limited to DPC installation, cavity tray detailing, cavity closers, sill falls, sub-sill waterproofing, drainage channels, cladding details, and any external rendering, pointing, or making good — is the sole responsibility of the main contractor or builder who prepared the opening. DTW accepts no liability for water ingress caused by defects in the building envelope or opening preparation by others.

c. Unprepared or Inadequate Base: DTW provides base level and finished floor level requirements at the point of survey or order confirmation. It is the client’s and/or their builder’s responsibility to ensure a structurally sound, level base is prepared to DTW’s specified dimensions prior to the agreed installation date. Where the base has not been prepared to DTW’s specification and the client instructs DTW to proceed with installation — including where on-site brickwork removal is required to achieve adequate clearance — DTW will install the product using proprietary packers and expanding foam to bridge any gap between the product frame and the structural base. This method does not constitute a structurally engineered base and is not equivalent to a solid bed of mortar or concrete. In such circumstances, DTW accepts no liability for: (i) water ingress below or through the base of the frame caused by inadequate sub-frame preparation, missing or compromised DPC, or absence of a solid sealed base; (ii) product deflection, frame distortion, panel dropping, or hardware failure caused by movement, compression, or failure of temporary packing where a solid base was specified but not provided; (iii) any consequential damage to the product, glazing, building fabric, or interior finishes arising from (i) or (ii) above. The client’s instruction to proceed with installation onto an unprepared or inadequate base shall be documented on site using DTW’s Installation Deviation Form, signed by the client or their appointed representative. This instruction constitutes the client’s acceptance of the above limitations and a waiver of any warranty claim relating to base preparation deficiencies.

d. Raised Installation Height: Where DTW is instructed to install products at a height above the structural sill or base level (e.g. to accommodate finished floor levels, flush thresholds, or tiling), DTW’s weathertightness warranty applies from the underside of the product frame upwards. All waterproofing below the base of the installed frame — including DPC, tanking, membrane, drainage falls, and any threshold drainage system — remains the responsibility of the client’s builder or main contractor.

e. External Finishing by Others: Where DTW’s order confirmation or installation specification states that external finishing or sealing works are to be completed by others (including but not limited to sand:cement rendering, pointing, or making good), such works form part of the building envelope weatherproofing and are not included within DTW’s installation scope or warranty. The client and/or their appointed contractor accepts full responsibility for completing these works to a weathertight standard within a reasonable timeframe following DTW installation. Any delay in completing these works, or deficiency in their execution, which results in water ingress to the property shall not constitute a defect in DTW’s installation.

f. Sealing Methodology: DTW selects sealant products and sealing methodologies based on manufacturer recommendations and industry best practice. All sealants used by DTW are suitable for external use on aluminium, uPVC, and associated substrates including south-facing elevations, unless stated otherwise. The client or their representatives may not dictate or refuse the use of specific sealant products without providing independent written technical evidence from an accredited laboratory or manufacturer that the product is unsuitable for the specific application. Refusal to permit DTW to complete sealing works using DTW’s specified materials may result in the weathertightness warranty being voided in respect of the affected area.

g. Cladding and External Detailing by Others: Where external cladding, flashings, or other external finishes are installed by others after DTW’s installation, any water ingress resulting from deficiencies in those works — including but not limited to gaps in cladding, inadequate flashing, poor sequencing of trades, or failure to seal the interface between cladding and DTW’s products — is not the responsibility of DTW.

h. Sliding Door Drainage Systems: Sliding and lift-and-slide door systems incorporate internal drainage channels designed to collect and manage water within the track system. A degree of water presence within the bottom track during heavy rainfall is normal operational behaviour and does not constitute a defect. Water will drain through the system’s integrated drainage route provided the surrounding construction facilitates this. If water pools without draining, this is typically attributable to a failure in the surrounding waterproofing, external detailing, or drainage provision, which falls within the main contractor’s scope.

14. Finishing

a. All supply and install jobs which require rip-out of old frames are costed to make good, only on the external face with silicone line (black/grey/white), or uPVC trim (black/white/grey) unless instructed differently during the quoting or survey stage.

b. If installation is going into a new opening, no external finishing is allowed, unless instructed at the quoting stage.

c. No internal finishing is allowed.

d. Additional finishing, such as finishing with aluminium trim will incur extra charges.

e. In the event aluminium pressings are allowed within our quotation (it will be identified within the description of the item or as a separate line item), we allow decorative aluminium pressings powder coated to a classic RAL colour.

f. Pressings are decorative only and are to be fixed to a suitable, waterproof substructure provided by others (we do not waterproof the pressings unless described within our quotation).

g. Anodised finishes will warrant an additional cost unless the cost is included as a line item within our quotation, or the item is described as being anodised.

h. Pressing configurations and sizes are not always clearly shown on architect’s drawings, so we reserve the right to revisit our prices for these items following our site survey if the type of pressing required is different from what is shown on initial drawings/the full extent of the pressing and connection details is not shown on the drawings.

i. Box Sash Windows (Vertical Sliding Windows): In the event of removal of box sash windows for replacement, NO INTERNAL FINISH is allowed. For installation of box sash windows into new openings, NO INTERNAL FINISH is allowed. The buyer is responsible for all internal finishing.

j. All visible defects or damages must be reported in writing within forty-eight (48) hours of delivery or installation. Failure to report within this timeframe will be deemed acceptance of the goods as delivered.

k. Powder Coating and Colour: All frames are polyester powder coated to a classic RAL colour from our standard range unless otherwise specified. Slight colour variations may occur between production batches and between different profile sections due to the nature of the powder coating process, and these do not constitute a defect. No warranty is extended on the adhesion of powder coat finish to polyamide thermal break sections. Specialist, non-standard, or textured finishes (including marine grade, Sensations, or metallic finishes) may carry different warranty terms and lead times, which will be advised at the point of order. The client is responsible for ensuring that the colour specified at the point of order is the colour required; DTW cannot accept returns or remakes based on the client’s dissatisfaction with a correctly supplied RAL colour.

l. Silicone Application Environment: Where silicone sealing is required, this should be carried out in a dust-free, dry environment for optimal adhesion and finish. DTW will not accept responsibility for defective silicone works where DTW has been required to carry out sealing in an environment that is dusty, wet, or otherwise unsuitable for silicone application. Where site conditions are unsuitable, DTW will advise the client and may defer silicone works until conditions improve.

m. Protection of Works: DTW has made no allowance within its quotation for protecting installed products following completion. Once DTW’s installation is complete and signed off, responsibility for protecting the installed products from damage by other trades (including but not limited to plasterers, painters, decorators, renderers, and scaffolders) passes to the client. Any damage caused to DTW’s products by other trades following installation is not covered under warranty and any remedial works will be chargeable.

15. Supply-Only Delivery and Storage

a. Delivery Terms: Unless otherwise stated, all supply-only orders are priced ex-works from our premises. Delivery charges will be advised at the point of order based on location, load size, and access requirements. DTW requires suitable labour and access at the delivery point to unload. DTW will not be liable for damage to products caused during unloading by others.

b. Storage Charges: DTW reserves the right to levy storage charges for all goods which remain uncollected or where the client is unable to accept delivery five (5) working days after first availability for collection or delivery. Storage will be charged at £50.00 + VAT per day or part thereof. Where DTW is required to store materials off-site that have been properly purchased to conform with the client’s projected programme, and the programme is subsequently delayed by the client or for reasons beyond DTW’s control, DTW shall be entitled to payment for such materials upon presentation of a suitable invoice together with reasonable storage charges.

c. Risk Transfer: For supply-only orders, risk in the goods transfers to the client upon delivery to the specified delivery address or upon collection from DTW’s premises, whichever occurs first. DTW does not take responsibility for any damage caused to products by others during storage on site. Products must be stored in accordance with DTW’s storage guidance (upright, on level ground, protected from weather and site debris). Failure to store products correctly may affect warranty coverage.

16. Non-Standard Hardware and Modifications

a. Unless otherwise stated, DTW allows for standard ironmongery as recommended by the system supplier and compatible with the specified profile section. Any non-standard items requested by the client and included in the order may affect programme lead times and may nullify any system or performance warranty on the affected product. DTW will advise the client where non-standard hardware is requested and will not be liable for any warranty exclusion arising from the use of non-standard components.

b. Where the client or any third party modifies, adjusts, or replaces any hardware, gaskets, seals, or components installed by DTW without DTW’s prior written consent, the warranty on the affected product(s) shall be void.

17. Quality and Inspection

a. The buyer must be present on the Installation Day. If it is a multi-day installation, you must be present on the last day (at least) to inspect the installation, sign the Satisfaction Note, go through the operation of each product, and settle your balance fee with the installer. If for any reason you are unable to be present at the installation, you should appoint a representative that you trust to check, make payment, and sign on your behalf. Otherwise, an alternative mutually convenient date for installation can be arranged.

b. DTW takes no responsibility for nickel sulphide inclusions. All glass is manufactured in accordance with the relevant BS/EN regulations and all tolerances therein (all toughened glass has a tolerance of ± 2mm). Any visual defects in the glass are deemed acceptable if they are not noticeable from two (2) metres away (non-toughened glass) or three (3) metres away (toughened or laminated glass) at right angles to the glass and in normal daylight, excluding the 50mm band around the glass edge.

c. Any visual checks for scratches are to be completed prior to any finishing works being done on site, as this can cause scratches to the glass if they are not protected. All glass can be assessed in accordance with the GGF guidelines and if tests are not passed, units will be replaced.

d. Please request a copy of the GGF guidelines if you would like comprehensive information on this subject.

e. Paintwork should be visually inspected from a minimum distance of THREE (3) metres in line with British Standard. Any proposal to inspect paint from a closer viewing range will not be accepted.

f. DTW offers a twelve (12) month guarantee on workmanship (to cover the defects liability period) and offers a ten (10) year guarantee for most of the products. Please request the warranty period prior to order so that you are aware of the applicable warranty.

18. Completion

a. For supply only, the warranty certificate will be supplied when we receive final payment. The date of warranty on a supply only job is the day the products are delivered.

b. For supply and install, the FENSA certificate (where applicable) is to be supplied on completion. Completion is determined on the day the job is signed off as complete, and final balance payment has been received.

c. The ten-year manufacturing and installation warranty date starts from the day of completion. In the event the final balance is not cleared on the day of completion, we reserve the right to void the warranty.

d. To the extent permitted by law, we are not liable for any indirect, incidental, or consequential damages, including but not limited to, loss of profits, revenue, business, or goodwill.

19. Limitation of Liability

a. DTW’s liability in contract, tort, or otherwise arising through or in connection with this Agreement or through or in connection with the completion of obligations under this Agreement shall be limited to the cost value of the project paid by the Client to DTW.

b. To the extent it is lawful, DTW shall not be liable to the Client in contract, tort, negligence, breach of statutory duty, or otherwise for any loss, damage, costs, or expenses of any nature whatsoever incurred or suffered by the Client of an indirect or consequential nature, including without limitation any economic loss, loss of goodwill, or other loss of turnover, profits, or business.

20. Indemnity

a. The Client hereby agrees to indemnify DTW, and any of its Professionals provided for services, against any and all damage, liability, and loss, as well as legal fees and costs incurred, as a result of services provided under this Agreement, or any transaction or matter connected with the Services or the relationship between the Client and DTW arising out of the fault of Client.

b. This clause shall not be read to provide indemnification for any Party in the event that a competent court of law, rendering a final judgment, holds that the bad faith, gross negligence, or wilful misconduct of the Party caused the damage or loss.

21. Warranty Exclusions and Labour Charges

a. Labour associated with the replacement of any items under warranty, including oversized glass units, is not covered. Labour will be billed at £95.00 plus VAT per hour per operative, plus travel charges at £0.55 per mile or a flat fee as advised. Any specialist lifting or access equipment will be chargeable at cost plus 30% project management fee. Warranty work will only proceed once all outstanding balances, including labour costs, are settled in full.

22. Complaints and Disputes

a. Complaints Procedure: All complaints must be submitted in writing to info@directtradewindows.co.uk. DTW will acknowledge receipt within five (5) working days and provide a substantive response within twenty (20) working days. Complex technical matters may require extended investigation, in which case DTW will advise the client of the expected timeframe.

b. Site Inspections: Where DTW attends site to investigate a complaint, such attendance is offered as a goodwill gesture and does not constitute an admission or acceptance of fault. DTW reserves the right to charge for site inspections where the issue is found not to be attributable to DTW’s products or installation. Site inspection charges will be advised in advance.

c. Independent Reports: Where the client obtains an independent report or expert opinion in relation to a complaint, DTW reserves the right to review and respond to any such report. Reports must be prepared by a suitably qualified professional with relevant expertise in fenestration or building envelope performance. DTW will not accept reports that fail to distinguish between defects in DTW’s products/installation and defects in the surrounding building fabric or works by others.

d. Third-Party Interference: If any third party (including but not limited to the client’s builder, project manager, or other contractors) carries out work on, around, or adjacent to DTW’s installed products without DTW’s prior written consent, DTW’s warranty may be affected. DTW accepts no liability for any issues arising from interference with its installed products by third parties.

e. Pre-Action Protocol: In the event of a dispute, DTW will follow the Pre-Action Protocol for Construction and Engineering Disputes. DTW is entitled to fourteen (14) days to acknowledge a Letter of Claim and twenty-eight (28) days to provide a full Letter of Response. Artificially compressed deadlines imposed by the claimant will not be accepted.

23. Disclaimer of Warranties

a. Services Provision: DTW provides all services to the Client “As Is” without any warranty, express or implied, except as required by law. The Company specifically disclaims all implied warranties to the fullest extent permitted by law, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. DTW does not warrant or represent that the products or services will meet the Client’s requirements or prove useful in any specific manner. Nothing in these Terms and Conditions affects the consumer’s statutory rights under the Consumer Rights Act 2015, including the right to goods that are of satisfactory quality, fit for purpose, and as described.

b. Commencement of Warranty: For supply and install contracts, the warranty period commences on the first day of installation. For supply-only contracts, the warranty period commences on the date of delivery or collection. Where a project comprises multiple phases or deliveries, a single warranty period shall apply commencing from the first day of the first installation or first delivery (as applicable). Should the client require separate warranty certificates per phase or per item, DTW reserves the right to charge an administration fee of £120.00 + VAT per additional warranty certificate issued.

c. Scope of Warranty: Our warranties extend for the following durations: ten (10) years against discolouration, cracking, warping, shrinkage, and other manufacturing or workmanship defects. Locks, hinges, handles, and other ancillary hardware are covered for one (1) year. Sealed units are warranted for five (5) years against the failure of hermetic seals, which can cause condensation between the glass panels. Please note, glass breakage subsequent to installation and breakage due to nickel inclusion are not covered under this warranty.

d. Labour rates are outlined under the ‘Warranty Exclusions and Labour Charges’ section.

e. Warranty Does Not Cover: (i) Damage caused by pressure washing, jet washing, or non-standard water testing; (ii) water ingress attributable to defects in the building envelope, structural openings, DPC, cladding, or other works by others; (iii) product deflection, panel dropping, or hardware failure caused by inadequate base preparation by others; (iv) damage caused by third-party interference with DTW’s installed products; (v) normal wear and tear of moving parts, gaskets, and weatherseals; (vi) consequential damage to internal finishes, floor coverings, or decorations; (vii) damage caused by failure to maintain products in accordance with DTW’s maintenance guidance; (viii) damage caused by other trades following installation; (ix) products that have been modified, adjusted, or repaired by any party other than DTW without DTW’s prior written consent; (x) colour fading, chalking, or discolouration caused by extreme environmental conditions, chemical exposure, or failure to clean products regularly; (xi) condensation (external or internal) as described in clause 10(h).

f. Maintenance Obligation: All warranties are conditional upon the client maintaining the installed products in accordance with DTW’s maintenance guidance and/or the system manufacturer’s recommendations. At a minimum, this includes: regular cleaning of frames, glass, and drainage channels; lubrication of moving parts (hinges, locks, handles) at least once per year; clearing debris from drainage slots and tracks; inspection of weatherseals and gaskets for wear. Failure to maintain products may reduce their lifespan and may void the warranty in respect of any defect attributable to lack of maintenance.

g. Transfer of Warranty: DTW’s warranties are transferable to a subsequent owner of the property in the event of a sale. The original client or the new owner must notify DTW in writing of the change of ownership and provide the new owner’s name, address, and contact details. A warranty transfer administration fee of £250.00 + VAT is payable prior to the transfer being processed. The transferred warranty shall be subject to the same terms, conditions, exclusions, and remaining duration as the original warranty. DTW will issue a replacement warranty certificate in the new owner’s name upon receipt of payment and the required information. No warranty transfer will be processed where there are outstanding balances on the original contract.

24. Late Payment and Debt Recovery

a. Late Payment Interest: If the client fails to make any payment due under this Agreement by the due date, DTW reserves the right to charge interest on the overdue amount at a rate of 4% per annum above the Bank of England base rate from time to time, calculated on a daily basis from the due date until the date of actual payment (whether before or after judgment). This is without prejudice to DTW’s statutory right to claim interest under the Late Payment of Commercial Debts (Interest) Act 1998 where applicable.

b. Debt Recovery Costs: The client shall be liable for all reasonable costs and expenses (including but not limited to solicitors’ fees, court fees, enforcement agent fees, and tracing agent fees) incurred by DTW in recovering any overdue amounts. Where the Late Payment of Commercial Debts (Interest) Act 1998 applies, DTW is also entitled to claim the fixed sum compensation provided under that Act.

c. Right to Suspend Work: Without prejudice to any other right or remedy, DTW reserves the right to suspend all further work, manufacturing, and/or deliveries under this Agreement and any other agreement between DTW and the client if any payment is overdue by more than seven (7) days. DTW shall not be liable for any delay or loss arising from such suspension. Any agreed delivery or installation dates shall be extended by a period equal to the duration of the suspension. DTW will notify the client in writing before exercising this right.

d. Cross-Default: If the client fails to make any payment due under this Agreement, DTW may treat such failure as a default under any and all other agreements between DTW and the client, and may exercise its rights under this clause in respect of all such agreements.

e. No Set-Off: All amounts due under this Agreement shall be paid in full without any set-off, counterclaim, deduction, or withholding (other than any deduction or withholding of tax as required by law). Any dispute regarding quality, defects, or completion does not entitle the client to withhold payment of amounts that are not the subject of a genuine and quantified dispute.

25. Intellectual Property and Confidentiality

a. Ownership of Designs: All drawings, CAD files, design documents, specifications, technical calculations, and other intellectual property created by DTW in connection with any quotation, survey, or order remain the sole and exclusive property of DTW at all times, regardless of whether the client has paid for design work. The client is granted a limited, non-transferable licence to use such materials solely for the purposes of the project to which they relate.

b. Prohibition on Sharing: The client shall not share, distribute, reproduce, or disclose DTW’s drawings, designs, specifications, or any other intellectual property with any third party (including but not limited to competing fabricators, installers, architects, or contractors) without DTW’s prior written consent. Any unauthorised use or disclosure shall entitle DTW to seek injunctive relief and/or damages.

c. Return of Materials: Upon request by DTW, or upon cancellation or termination of this Agreement, the client shall return or destroy all copies of DTW’s intellectual property in their possession and confirm such destruction in writing.

d. Photography and Marketing Consent: DTW may photograph or video completed installations for use in its portfolio, website, social media, marketing materials, and trade publications. No personal information or identifiable address details will be published without the client’s consent. The client may opt out of photography by notifying DTW in writing prior to installation. Where the client permits photography, DTW is granted an irrevocable, royalty-free licence to use the images for promotional purposes.

26. Site Access and Health and Safety

a. Site Access: The client shall ensure that DTW personnel and vehicles are provided with safe, clear, and unobstructed access to the site and the installation area at all agreed times. Where access is restricted, delayed, or prevented for any reason attributable to the client or their other contractors, any additional costs or delays shall be borne by the client.

b. Health and Safety Responsibilities: The client (or their principal contractor where applicable) is responsible for the overall health and safety of the site in accordance with the Health and Safety at Work etc. Act 1974 and the Construction (Design and Management) Regulations 2015 (CDM 2015). DTW’s installers will comply with site health and safety rules and their own risk assessments and method statements, but DTW does not accept responsibility for hazards created by the client or other trades.

c. Asbestos and Hazardous Materials: The client shall notify DTW in writing prior to the survey or commencement of any works if asbestos, lead paint, or any other hazardous materials are known or suspected to be present in or around the installation area. If hazardous materials are discovered during installation, DTW reserves the right to immediately cease work and withdraw from site until the hazard has been professionally remediated at the client’s cost. Any delay caused shall not constitute a breach by DTW and installation dates shall be rescheduled accordingly.

d. Welfare and Facilities: For installations exceeding one (1) day, the client shall provide DTW’s installation team with reasonable access to toilet facilities, running water, and a sheltered area for breaks.

27. Consumer Cancellation Rights

a. Distance and Off-Premises Contracts: Where the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 apply (for example, where the contract was agreed at the client’s home, by telephone, or by email rather than at DTW’s trade premises), the client has a statutory right to cancel the contract within fourteen (14) days of the date the contract was entered into (the \”cooling-off period\”), without giving any reason. This is a statutory right that cannot be excluded by contract.

b. Consent to Early Commencement: The client acknowledges that DTW’s products are manufactured to bespoke specifications using non-standard aluminium extrusion profiles, glass units, and hardware ordered specifically for the client’s project. By making a deposit payment, the client provides express consent for DTW to commence work immediately, including but not limited to: ordering bespoke aluminium extrusion profiles from the system supplier; ordering glass units, panels, and ancillary components; commencing design, cutting, fabrication, and assembly. The client acknowledges that these materials are ordered to their specific requirements and cannot be returned to the supplier or reused on other projects.

c. How to Cancel: To exercise the right to cancel, the client must inform DTW of their decision by a clear written statement sent to info@directtradewindows.co.uk or by post to DTW’s registered office within the fourteen (14) day cooling-off period. A cancellation form is available on request.

d. Effects of Cancellation During Cooling-Off Period: If the client cancels within the cooling-off period having given consent for early commencement under clause 27(b), the client shall pay DTW an amount proportionate to the work carried out and costs incurred up to the point of cancellation. This includes but is not limited to: the full cost of any extrusion profiles, glass units, hardware, and other materials ordered or received; design and survey costs; any manufacturing, cutting, or fabrication work commenced; delivery or storage costs incurred. DTW will provide an itemised breakdown of costs incurred upon request. Any deposit paid will be applied against these costs, and any balance due to or from the client will be settled within fourteen (14) days of cancellation.

e. Loss of Cancellation Right: The right to cancel under the Consumer Contracts Regulations 2013 is lost once the products have been fully manufactured to the client’s bespoke specification, as bespoke goods made to the consumer’s specification are exempt from the right to cancel under Regulation 28(1)(b) of the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013. Given the nature of DTW’s products (custom-profiled aluminium extrusion cut and fabricated to site-specific dimensions), this exemption typically applies from the point at which extrusion profiles are cut to size.

f. On-Premises Contracts: Where the contract is entered into on DTW’s trade premises (showroom or office), the Consumer Contracts Regulations 2013 cooling-off period does not apply. The cancellation terms set out in Section 3 of these Terms and Conditions shall apply instead.

28. Term and Termination

a. This Agreement will come into force upon the client making any payment to DTW (including but not limited to deposit, stage payment, or full payment), which shall constitute the client’s acceptance of these Terms and Conditions in full. The Agreement shall remain in full force and effect until the completion of services and full payment by the Client. These Terms and Conditions are provided with every quotation issued by DTW and are available on request at any time. It is the client’s responsibility to read and understand these Terms and Conditions prior to making payment.

b. If this Agreement is terminated before the expiration of its natural term, the Client hereby agrees to pay for all the products and services rendered up to the date of termination, and for any, and all expenditures due for payment after the date of termination for commitments reasonably made and incurred by DTW related to the rendering of Services prior to the date of termination.

c. Any termination under this subpart shall not affect the accrued rights or liabilities of either Party under this Agreement or at law. Any provision or subpart of this Agreement that is meant to continue after termination or come into force at or after termination shall not be affected by this subpart.

29. General Provisions

a. This Agreement shall be governed in all respects by the laws of England, United Kingdom. The Parties agree that this choice of law, venue, and jurisdiction provision is not permissive, but rather mandatory in nature.

b. This Agreement and the terms and conditions contained in this Agreement apply to and are binding upon the parties’ successors, assigns, executors, administrators, beneficiaries, and representatives.

c. Headings to this Agreement are for convenience only and shall not be construed to limit or otherwise affect the terms of this Agreement.

d. This Agreement may only be amended in writing and agreed by both Parties.

e. This Agreement may be executed in counterparts, all of which shall constitute a single agreement.

f. This Agreement constitutes the entire agreement between the Parties and supersedes any prior or contemporaneous understandings, whether written or oral.

g. Consumer Statutory Rights: Where the Client is a consumer (as defined by the Consumer Rights Act 2015), nothing in these Terms and Conditions is intended to or shall affect the Client’s statutory rights. In the event of any conflict between these Terms and Conditions and the Client’s statutory rights, the Client’s statutory rights shall prevail.

h. Severability: If any provision of these Terms and Conditions is found by any court or competent authority to be invalid, unlawful, or unenforceable, that provision shall be deemed modified to the minimum extent necessary to make it valid and enforceable. If modification is not possible, the relevant provision shall be deemed deleted. Any modification or deletion of a provision under this clause shall not affect the validity and enforceability of the remaining provisions.

i. Notices: Any notice required or permitted under this Agreement shall be in writing and may be delivered by hand, sent by first class post, or sent by email to the addresses specified in the quotation or order confirmation. Notices sent by first class post shall be deemed received two (2) working days after posting. Notices sent by email shall be deemed received on the next working day after sending, provided no delivery failure notification is received. All formal notices to DTW must be sent to info@directtradewindows.co.uk.

j. Right to Subcontract: DTW reserves the right to subcontract or delegate any of its obligations under this Agreement to suitably qualified third-party contractors or suppliers without the client’s prior consent. DTW shall remain responsible for the performance of any subcontracted obligations.

k. Third Party Rights: A person who is not a party to this Agreement shall not have any rights under the Contracts (Rights of Third Parties) Act 1999 to enforce any term of this Agreement. This clause does not affect any right or remedy of any person which exists or is available otherwise than pursuant to that Act.

l. No Waiver: No failure or delay by DTW in exercising any right, power, or privilege under this Agreement shall operate as a waiver thereof, nor shall any single or partial exercise of any right, power, or privilege preclude any other or further exercise thereof or the exercise of any other right, power, or privilege. The rights and remedies provided in this Agreement are cumulative and not exclusive of any rights or remedies provided by law.

m. Limitation on Claims: Any claim by the client in respect of defects, damage, or incomplete works must be notified to DTW in writing within thirty (30) days of the client becoming aware (or when the client ought reasonably to have become aware) of the issue. Failure to notify within this period shall not extinguish the claim but may affect the remedies available where DTW has been prejudiced by the late notification. Nothing in this clause affects the client’s statutory rights or the limitation periods prescribed by the Limitation Act 1980.

n. Right to Amend Terms: DTW reserves the right to update or amend these Terms and Conditions from time to time. Any amendments will apply to contracts entered into after the date of amendment. Existing contracts will continue to be governed by the Terms and Conditions in force at the date the contract was entered into (i.e. the date of first payment).